Summary
If a modular building component is damaged, missing or no longer usable, send KUBO the project or order reference, the exact building and module location, clear whole-item and interface photos, key dimensions, any visible markings, the required quantity and a short description of the problem. Include handing, orientation, finish, rating or connection details where relevant. KUBO can use this information to locate the affected installed component, review available project records and determine what additional information is needed before the correct replacement route is confirmed.
The objective is not simply to find a part that looks similar. A replacement must be identified against the installed condition, surrounding interfaces and available project documentation. Depending on the component, the practical outcome may be an original replacement, a compatible alternative, approved local sourcing, factory replenishment or a broader project change.
Why a Photo Alone May Not Identify the Correct Part
Photos are an important starting point for modular building replacement parts, but appearance alone does not establish compatibility. Two doors may look almost identical while using different frame dimensions, handing, lock positions or finishes. Two electrical accessories may have similar housings but different ratings, terminals or enclosure conditions. A wall panel can appear visually similar while differing in thickness, edge profile, cut-outs, surface finish or attachment method.
This is why KUBO reviews the physical evidence together with the available project records, drawings or schedules. Dimensions, markings, function and surrounding interfaces help narrow the identification. For components connected to adjacent systems, the interface often matters as much as the component itself.
Where the issue involves structural damage, live electrical work, pressurized plumbing or another safety-critical condition, appropriate qualified site personnel should review the condition before removal, isolation or repair work proceeds. Replacement-part identification does not substitute for the required site safety assessment.
The Six-Step KUBO Replacement-Part Identification Workflow
1. Locate the Original Project or Order
Start with the project name, order reference or other information that allows KUBO to identify the supplied building package. This creates the link between the current site condition and the project documentation available for review.
If the project contains several buildings, blocks or delivery batches, identifying the correct building or block is equally important. Similar-looking units within the same project may still contain different configurations because of room function, orientation or approved project revisions.
2. Locate the Exact Module and Component
Describe where the affected item is installed. Useful location information can include the building or block, module, room, wall position, door opening, window opening or service zone.
A description such as โdamaged doorโ is usually less useful than โexternal door to Room 03, Module B2, corridor side.โ For container house replacement parts, this location information helps distinguish between visually similar components installed in different positions.
3. Collect Physical Identification Evidence
Photograph the complete component before focusing on details. Add close-up images of markings, fixing points, interfaces, damage and surrounding construction. Measure the dimensions that affect fit or connection rather than relying on estimated size.
For a door, relevant information may include frame dimensions, handing, hardware positions, finish and opening conditions. A window may require frame dimensions, finish and opening arrangement. A service component may require function, rating, connection and enclosure context. Panel identification can depend on dimensions, build-up, finish, cut-outs, adjoining profiles, seals and attachment details.
4. Compare the Site Evidence with Controlled Project Records
KUBO can compare the submitted information with available project records, drawings or schedules. The purpose of this modular building component identification step is to determine which installed component the request most likely relates to and whether the available information is sufficient for a supply decision.
For projects that have been modified on site, the current installed condition should also be documented clearly. Preliminary or historical drawings may not represent every later approved change. The distinction between early planning information and issued project documentation is discussed further in KUBO’s guide to preliminary camp layouts and final construction drawings.
5. Classify the Appropriate Supply Route
Once the component is identified, KUBO can review the practical route for that specific request. The result may be an original replacement, a compatible alternative, approved local sourcing, factory replenishment or a broader project change requiring further review.
Current availability, price, supply route and lead time must be reconfirmed for the actual request. A component used on an earlier project should not be assumed to remain available under the same commercial or supply conditions.
6. Confirm the Replacement and Update the Installed Record
Before procurement or installation proceeds, confirm the identified item against the current dimensions, orientation, interfaces and quantity required. Where an alternative component is accepted, the installed record should also be updated so future maintenance teams know what is actually present on site.
This closes the incident as an identifiable project change rather than leaving future teams to reconstruct the decision from photographs or purchase records alone.
What Evidence to Send for Different Component Types
| Item | Minimum identification evidence | Interface details that may matter | What not to assume |
|---|---|---|---|
| Door / door hardware | Whole-door photos, frame dimensions, visible markings, hardware photos, quantity and location | Handing, lock and hinge positions, frame profile, finish, opening direction and surrounding wall condition | Do not assume a visually similar door, lock or hinge set has the same dimensions or fixing positions |
| Window | Whole-window photos, frame dimensions, opening arrangement, visible markings and location | Frame profile, finish, opening direction, hardware arrangement and adjoining panel interface | Do not assume the same apparent window size means the same frame or opening configuration |
| Wall or enclosure panel | Overall dimensions, photos of both faces where accessible, thickness or build-up information, finish and damaged area | Cut-outs, adjoining profiles, seals, edge condition, fixing method and nearby penetrations | Do not select a panel from surface appearance alone |
| Trim / seal / fastener | Close-up and contextual photos, dimensions, cross-section where practical, location and quantity | Adjoining materials, edge profile, fixing condition, exposure and required finish | Do not assume similar-looking trims, seals or fasteners are interchangeable |
| Electrical or plumbing service item | Whole-item photos, nameplate or markings, function, rating where shown, connection details and location | Enclosure context, terminals or pipe connections, surrounding equipment and access conditions | Do not substitute based only on housing shape, brand appearance or approximate size |
Copyable Replacement-Request Checklist
The following format can be copied into a replacement request. Include only the fields that apply to the affected component.
Project / order reference: Site / building / block: Module / room / exact location: Component description: Visible markings / label information: Key dimensions: Handing / orientation: Finish / color: Rating / specification shown on the item: Whole-item photos attached: Interface / surrounding-condition photos attached: Required quantity: Destination: Short problem description:
For unusual or complex items, a short video can also help show the location, movement, opening condition or surrounding interface. KUBO can review the initial information and advise what additional identification details are required.
Four Practical Outcomes After Identification
Original Replacement
Where the installed component can be matched to the project information and the relevant item remains available, the request may proceed as an original replacement. Availability, commercial terms and lead time still need to be reconfirmed for the current request.
Compatible Alternative
If the original item is unavailable or another solution is more appropriate, KUBO may review a compatible alternative. The decision should be based on the required function, dimensions, ratings and interfaces rather than appearance alone.
Approved Local Sourcing
Some items may be practical to source locally once the required specification and interfaces have been confirmed. Local availability can be useful when an appropriate equivalent exists near the project site, but the proposed item should still be checked against the relevant identification criteria before substitution.
Project Change or Factory Review
Sometimes the request is no longer a simple one-for-one replacement. Site modifications, changed openings, altered service conditions or damage involving several interfaces may require a broader review. In that case, the replacement request becomes a project-change question and may need additional dimensions, drawings or factory input before a route is confirmed.
Keep Incident Replacement Separate from Spare-Parts Planning
This process is intended for an active post-delivery incident where a specific installed component has already been identified as damaged, missing or unusable. It is different from planning spare-part quantities for a larger camp, repeated buildings or long-term operations. Buyers preparing a planned stock strategy can refer to KUBO’s guide to modular camp spare-parts planning.
It is also separate from determining whether a particular case falls within warranty scope. For information about the support and review route after delivery, see the KUBO warranty and after-sales support guide.
Frequently Asked Questions
What if the damaged part has no readable label?
A missing or unreadable label does not prevent the review from starting. Send the project or order reference, exact installation location, whole-item photos, interface photos, dimensions and a short description of the component’s function. KUBO can compare that information with available project records and advise what additional details are needed.
Can I send only a photo and ask KUBO to identify the part?
A photo can start the discussion, but it may not be enough to confirm compatibility. Dimensions, location, markings, orientation, rating or surrounding interfaces may be required depending on the component. Similar appearance alone is not sufficient evidence that two items are interchangeable.
Can we source the replacement locally?
Potentially. Approved local sourcing is one possible route when a suitable item can be identified against the required function, dimensions, ratings and interfaces. The proposed local item should be reviewed before substitution where compatibility affects fit, connection or operation.
Does identification mean the replacement is covered by warranty?
No. Component identification and warranty review are separate questions. The identification process determines what the affected installed item is and what supply route may be practical. Warranty status depends on the circumstances of the specific case and the applicable project terms.
Send KUBO a Reviewable Replacement Request
If a delivered KUBO modular building has a damaged, missing or unusable component, prepare the project reference, exact module location, photos, dimensions, markings, interface details, quantity and destination before contacting the team. This gives KUBO a practical basis for identifying the installed component and determining the next information or supply step.
Contact KUBO to submit your modular building replacement-part identification request.





